146
Recording
Bracket setting is performed based on the adjustment values for the White Balance fine
adjustment, and 3 pictures with different colors are automatically recorded when the
shutter button is pressed once.
1 Finely adjust the White Balance in step 2 of the
“Finely adjusting the White Balance” procedure, and
touch [ ]/[ ] to set the bracket.
[ ]: Horizontal ([A] to [B])
[ ]: Vertical ([G] to [M])
•
Bracket settings can also be made by rotating the control
dial.
2 Touch [Set].
•
[ ] is displayed in White Balance icon in the screen when the White Balance Bracket is set.
• The White Balance Bracket setting is released when this unit has been turned off (including
Sleep Mode).
• You will only hear the shutter sound once.
Not available in these cases:
•
The White Balance Bracket does not work in the following cases:
– Panorama Shot Mode
– When recording motion pictures
– When [Quality] is set to [ ], [ ] or [ ]
– When [HDR] is set to [ON]
White Balance Bracket
GGGGGG
AAAAAABBBBBBB
MMMMMM
6HW
To Next Page
Loading...
