Panasonic Lumix DMC-LC40

18
Turning Power on/off
1
Set the power switch to [ON].
• The status indicator lights.
2
Set the power switch to [OFF].
• When switching the power on/off, do not put any obstacle in front of the lens.
• Please be sure to remove the lens cap (P20) before you switch on the camera in recording
mode. If not, the message “REMOVE LENS CAP AND PRESS SET BUTTON” appears on
the LCD monitor. Please remove the lens cap and press [REVIEW/SET] button
1
.
KC3‑PP.book18ページ２００２年４月５日 金曜日 午前１１時５５分