25
VQT1L50
Preparation
Display in normal picture mode [ ].
(at the time of purchase)
12
13
8
10
9
5 6 73 4
1112
Recording mode
Flash mode ( P39 )
The fl ash icon turns red when
activating the fl ash and pressing the
shutter button halfway.
AF area
The AF area displayed is bigger than
usual when taking pictures in dark
places.
Focus ( P28 )
Picture size ( P60 )
Quality ( P60 )
6 : Jitter alert indication ( P30 )
Battery indication
The battery indication turns red
and blinks. (The status indicator
blinks when the LCD monitor is
turned off.)
Replace with new batteries or fully
charged Ni-MH batteries.
Remaining number of recordable
pictures ( P107 )
Recording indication
■
1
2
•
3
•
4
5
6
7
•
8
9
Built-in memory / Card
( or lights red during accessing.)
Do not do the following when the
access indication lights.
Turn the camera off.
Remove the batteries or the card.
Shake or impact the camera.
Disconnect the AC adaptor (optional).
Observe the above caution also when
pictures are being read or deleted or
the built-in memory (or the card) is
being formatted.
The access time for the built-in
memory may be longer than the
access time for a card. (Max. about
7 sec.)
Shutter speed ( P28 )
Aperture value ( P28 )
If the exposure is not adequate, the
aperture value and the shutter speed
turn red. (They do not turn red when
the fl ash is activated.)
Optical image stabilizer ( P66 )
For details about other displays, refer to
P95 .
Changing the display
Press [DISPLAY] to change the display.
Choose whether to display information
such as the number of pixels and
possible number of images for recording
while you are shooting. For details, refer
to P37 .
10
•
–
–
–
–
•
•
11
12
•
13
•
■
LCD Monitor and Changes to the Display
VQT1L50DMC-LS80P-PC.indd25VQT1L50DMC-LS80P-PC.indd25 2007/12/3116:03:442007/12/3116:03:44
To Next Page
Loading...
Need help?
General
Weight and Dimensions
