Panasonic Lumix DMC-LS80

45
VQT1L50
Advanced-Shooting
Auto Bracket Recording
3 pictures are taken in succession,
automatically changing the exposure.
The pictures are based on the selected
compensation range after setting the
exposure
( P44 ).
Press e (C) several times to
display [
B AUTO BRACKET]
and set the compensation range
of the exposure using w/q.
AUTO BRACKET
SELECT
EXIT
You can select OFF, ±1/3 EV, ±2/3 EV
or ±1 EV. (When you do not use auto
bracket, select [OFF].)
Press [MENU/SET] to apply.
When setting auto bracket, the auto
bracket icon [B] appears on the screen.
Press the shutter button to take
pictures.
The auto review function is activated
after taking pictures.
1
•
2
•
3
•
The auto bracket setting is canceled if
you turn the camera off. (Same occurs in
[POWER SAVE].)
You cannot use auto bracket in [STARRY
SKY] and [HI-SPEED BURST] mode.
The number of recordable pictures is 2 or
less, auto bracket cannot be activated.
The exposure may not be compensated
with auto bracket depending on the
brightness of the subject.
When auto bracket is activated, [FLASH]
is set to Forced Flash OFF [v].
Burst mode setting is canceled, when
[AUTO BRACKET] is activated.
•
•
•
•
•
•
VQT1L50DMC-LS80P-PC.indd45VQT1L50DMC-LS80P-PC.indd45 2007/12/3116:03:482007/12/3116:03:48