43
VQT1L50
Advanced-Shooting
Taking Pictures with the Self-timer
Press w [ ].
Select shutter speed using e/r
or w [].
SELFTIMER
SELECT
SET
OFF
10SEC.
2SEC.
or
Press [MENU/SET].
You can also press the shutter button
halfway to set.
When 5 seconds pass without any
operation, the setting selected at the time
is automatically adopted.
Press the shutter button halfway
to focus and then press it fully to
take a picture.
CANCEL
The self-timer indicator
A blinks and the shutter
is activated after 10
seconds (or 2 seconds).
If you press [MENU/
SET] when the self-
timer is being set, the
self-timer setting is canceled.
1
2
3
•
•
4
•
•
When using a tripod or in other cases,
setting the self-timer to 2 seconds is
a convenient way to stabilize the jitter
caused by pressing the shutter button.
When you press the button fully with
one stroke, the subject is automatically
focused just before the recording. In dark
places, the self-timer indicator blinks and
then it may turn on brightly to work as
the AF assist lamp for focusing on the
subject.
In Intelligent mode [ ], [10SEC.] or
[OFF] is selectable.
In [SELF PORTRAIT] mode, [2SEC.] or
[OFF] is selectable.
When you set the self-timer in burst
mode, the camera starts taking a picture
2 or 10 seconds after the shutter button
is pressed. The number of pictures taken
at one time is fi xed to 3.
We recommend using a tripod when
setting the self-timer.
You cannot use the self-timer in [HI-
SPEED BURST].
•
•
•
•
•
•
•
VQT1L50DMC-LS80P-PC.indd43VQT1L50DMC-LS80P-PC.indd43 2007/12/3116:03:472007/12/3116:03:47
To Next Page
Loading...
Need help?
General
Weight and Dimensions
