Panasonic Lumix DMC-LS80 User Manual

89
VQT1L50
Connecting to other equipment
Do not use any other USB connection
cables except the supplied one.
While [ACCESS] is being displayed,
do not disconnect the USB connection
cable.
When using Windows PC, click Safety
Remove Hardware icon on the task trey
fi rst to remove USB cable. When the
icon is not displayed, make sure the
connection screen is not displayed, and
turn the camera [OFF] to remove.
When connecting the camera to a
Windows 2000 OS PC with the USB
connection cable, do not replace the
card while the camera and the PC
are connected. The information on
the card may be damaged. Before
changing cards, make sure you
perform the necessary steps to safely
remove hardware (double-click the
icon in the task bar in Windows).
When there are many pictures on the
built-in memory or the card, it may take
some time to transfer them.
Motion image fi les in the built-in memory
or on a card in this unit may not play
properly on a computer, so upload them
to your computer for playback.
If the remaining battery power becomes
low while the camera and the PC are
communicating, the status indicator
blinks and the alarm beeps. In this case,
stop the communication at once on the
PC.
Pictures edited or rotated with a PC may
be displayed in black in playback mode,
multi playback and calendar.
If a card is not inserted when the camera
is connected to the PC, you can edit or
access the picture data on the built-in
memory. If a card is inserted, you can
edit or access the picture data on it.
You cannot switch between the built-in
memory and the card while the camera is
connected to the PC. When you want to
•
•
•
•
•
•
•
•
•
•
switch between the built-in memory and
the card, disconnect the USB connection
cable, insert (or remove) the card and
then connect the USB connection cable
to the PC again.
When connecting the camera to a Mac
OS v10.2 or lower and using SDHC
Memory card to inport the picture data,
set the Write-Protect switch on the SDHC
Memory Card to [LOCK].
Refer to the operating instructions of the
PC, too.
•
•
VQT1L50DMC-LS80P-PC.indd89VQT1L50DMC-LS80P-PC.indd89 2007/12/3116:03:572007/12/3116:03:57

Panasonic Lumix DMC-LS80 Specifications

General

Camera type	Compact camera
Sensor type	CCD
Image sensor size	1/2.5 \
Maximum image resolution	3264 x 2448 pixels
Digital zoom	4 x
Optical zoom	3 x
Focal length range	5.5 - 16.5 mm
Interface	USB 2.0
Digital SLR	No
Built-in flash	Yes
Camera shutter speed	8 - 1/2000 s
Focal length (35mm film equivalent)	33 - 100 mm
Focus adjustment	Auto
Normal focusing range	0.5 - ∞ m
Macro focusing range (tele)	0.3 - ∞ m
Macro focusing range (wide)	0.05 - ∞ m
Flash modes	auto, Red-eye reduction, Slow synchronization
Flash range (tele)	0.3 - 3.1 m
Flash range (wide)	0.6 - 6.3 m
Internal memory	27 MB
Compatible memory cards	mmc, sd, sdhc
Motion JPEG frame rate	30 fps
Maximum video resolution	848 x 480 pixels
Display diagonal	2.5 \
USB version	2.0
Product color	Pink
Battery type	AA
Battery technology	Alkaline
Number of batteries supported	2
Scene modes	beach, Candlelight, Children, Close-up (macro), Cuisine, Fireworks, Night landscape, Night portrait, party (indoor), Portrait, self-portrait, Sports, Sunset, Landscape (scenery)

Weight and Dimensions

Depth	31 mm
Width	96 mm
Height	62 mm
Weight	129 g