130
SQW0740
4K Photo and Drive Settings
Taking Pictures While Adjusting a Setting
Automatically
(Bracket Recording)
Recording mode:
You can take multiple pictures while automatically adjusting a setting by pressing the
shutter button.
1
Set the menu (→42)
→ [Rec] → [Bracket] → [Bracket Type]
(Exposure Bracket)
Press the shutter button to perform recording while adjusting
the exposure. (→131)
*
(Aperture Bracket)
Press the shutter button to perform recording while adjusting
the aperture. (→132)
(Focus Bracket)
Press the shutter button to perform recording while adjusting
the focus position. (→132)
(White Balance Bracket)
Press the shutter button once to take three pictures with
different white balance settings automatically. (→109)
*
Available in Aperture-Priority AE Mode or when the ISO sensitivity is set to [AUTO] in Manual
Exposure Mode.
2
Press to select [More settings] and then press [MENU/SET]
• For information on [More settings], refer to the page that describes each function.
• Press the shutter button halfway to exit the menu.
3
Focus on the subject and take a picture
• When Exposure Bracket is selected, the bracket display flashes until all of the
pictures you have set are taken. If you change the bracket settings or turn off
the camera before all of the pictures you have set are taken, the camera restarts
recording from the first picture.
â–
To cancel [Bracket]
Select [OFF] in step
1
.
To Next Page
Loading...
Need help?
General
