117
SQW0740
4K Photo and Drive Settings
Selecting pictures from 4K burst file and saving
This section describes how to select pictures from a 4K burst file and save them.
For details on how to record 4K burst files, refer to (→110).
1
Select a picture with the [ ] on the playback screen,
and press
• The same operation can be performed by touching [ ].
• In the case of recording with [
] ([4K Pre-Burst]), proceed to
the step
3
.
2
Drag the slide bar to perform rough scene selection
• For information on how to operate the slide view screen, refer to
(→118).
• In the case of recording with [
] ([4K Burst]) or [ ] ([4K
Burst(S/S)]), if you touch [
] (or press the [Fn2] button), you
can choose a scene in the 4K burst playback screen. (→119)
Slide view screen
3
Drag to select the frame you want to save as a picture
• The same operation can be performed using .
4
Touch [ ] to save the picture
If you use [4K PHOTO Bulk Saving] in the [Playback] menu, you can bulk save 5 seconds’
worth of 4K recording. (→215)
●
The picture will be saved in JPEG format.
●
The picture will be saved with recording information (Exif information), including its shutter speed,
aperture and ISO sensitivity information.
To Next Page
Loading...
