133
SQW0740
4K Photo and Drive Settings
Taking pictures automatically at set intervals
[Time Lapse Shot]
Recording mode:
You can preset data such as recording start time and time lapse to take still pictures
automatically. This setting is convenient for taking pictures at constant intervals for
landscape scenes, observation of the gradual changes in animals/plants, and other
applications. The pictures are recorded as a set of group pictures (→166). When [Time
Lapse Video] in the [Playback] menu is used, you can create a motion picture. (→220)
• Complete the date and time settings in advance. (→28)
1
Set the menu (→42)
→ [Rec] → [Time Lapse Shot]
[Start Time] [Now] Starts the recording by fully-pressing the shutter
button.
[Start Time Set] Any time up to 23 hours 59 minutes ahead can be
set.
Press to select the item (hour and/or
minute), and to set the start time, and
press [MENU/SET]
[Shooting Interval] /
[Image Count]
The recording interval and the number of pictures can be set.
: Select the item (minute/second/number of pictures)
: Setting
[MENU/SET]: Set
• The camera may not be able to record using the preset interval and number of
pictures to be recorded under some recording conditions.
2
Press to select [Start] and press [MENU/SET]
3
Press the shutter button fully
• The recording starts automatically.
• During recording standby, the camera turns off automatically when no operation
is performed for a preset interval. The [Time Lapse Shot] recording will continue
even if the camera is turned off, and the camera is automatically turned on at the
recording start time. If you want to turn on the camera manually, press the shutter
button halfway.
• Operations during recording standby (The camera is turned on)
Operation
Touch
operation
Description
[Fn1]
Displays a selection screen that lets you pause or stop the
recording
Displays a selection screen that lets you resume or stop the
recording (during pause)
To Next Page
Loading...
Need help?
General
