266
SQW0740
Wi-Fi
[Wi-Fi Setup]
Configure the settings required for the Wi-Fi function.
[Wi-Fi Setup] cannot be changed when connected to Wi-Fi.
→ [Setup] → [Wi-Fi] → [Wi-Fi Setup]
Item Description
[Wi-Fi Password]
You can improve security
by enabling password entry
for a direct connection to a
smartphone.
[ON]: Connects the camera and a smartphone using an SSID and
password. (→233)
[OFF]: Connects the camera and a smartphone using an SSID.
(→232)
• When [ON] is selected, you can also set up a connection by
scanning a QR code. (→233)
[LUMIX CLUB] Acquires or changes the “LUMIX CLUB” login ID. (→254)
[PC Connection]
You can set the workgroup.
You must connect to the same workgroup as the destination
computer when sending pictures to the computer.
(The default is set to “WORKGROUP”)
[Change Workgroup Name]:
Enter the workgroup of the connecting computer.
[Restore to Default]:
Returns settings to default settings.
• For details on how to enter characters, refer to “Entering Text”
(→49)
• To use with a computer of the standard settings, you do not have
to change the workgroup.
[Device Name]
You can change the name
(SSID) of this unit.
Press [DISP.] button
Enter the desired device name (Up to 32 characters can be
entered)
• For details on how to enter characters, refer to “Entering Text”
(→49)
To Next Page
Loading...
