245
SQW0740
Wi-Fi
Preparation
Install “Image App” in advance. (→231)
→ [Setup] → [Wi-Fi] → [Wi-Fi Function] → [New Connection]
→ [Send Images While Recording] / [Send Images Stored in the Camera]
→ [Smartphone]
1
Select [Via Network] or [Direct] to connect (→260, 263)
(On your smartphone)
■
When connecting with [Via Network]
Set Wi-Fi function to “ON”
Select a wireless access point and set
Start “Image App” (→231)
■
When connecting with [Wi-Fi Direct] or [WPS Connection] in [Direct]
Start “Image App” (→231)
■
When connecting with [Manual Connection] in [Direct]
Set Wi-Fi function to “ON”
Select the SSID displayed on this unit
Start “Image App” (→231)
2
Select the device you wish to connect to
3
Check the send settings, and select [Set]
• To change the send setting, press the [DISP.] button. (→244)
[Send Images While Recording]
4
Take a still picture (→242)
[Send Images Stored in the Camera]
4
Select the picture (→243)
Sending pictures to a smartphone
To Next Page
Loading...
