214
SQW0740
Using Menu Functions
Menu list
The following operating methods are available to make adjustments on the comparison
screen.
Current setting
Operation
Touch
operation
Description
Drag Used to make adjustments
[DISP.] [DISP.] Used to return to the setting screen
[MENU/SET] [Set]
Used to finalise an adjustment you
just made and to return to the item
selection screen
SetSet
• If you touch the picture at the centre, it will be enlarged. If you touch [ ], the picture
will be reduced to the original size.
When [Setup] is selected
When you select an item, the screen for selecting [Reinstate Adjustments], [Color Space],
or [Picture Size] is displayed.
Use to select the item and press [MENU/SET]
• When [Reinstate Adjustments] is selected, confirmation screen is displayed. When you select
[Yes ], the item selection screen reappears.
Use to select the setting and press [MENU/SET]
●
The result of a RAW file developed by this camera and a RAW file developed by the software
“SILKYPIX Developer Studio SE” (→275) will not be exactly the same.
●
Regardless of the aspect ratio of the picture during recording, a RAW image recorded on this
camera is always recorded with the aspect ratio set to [3:2] (5472×3648), but if you perform [RAW
Processing] from the [Playback] menu, the picture will be processed with the aspect ratio fixed as
that at the time of recording.
●
The [White Balance] setting of still pictures recorded using [Multi Exp.] is fixed to the setting used
during recording.
●
When an HDMI micro cable is connected, [RAW Processing] is disabled.
●
You can perform RAW processing on pictures recorded using this unit only.
To Next Page
Loading...
Need help?
General
