301
SQW0740
Others
Usage cautions and notes
Caring for your camera
To clean your camera, remove the battery, the DC coupler (optional) or a card, or
disconnect the power plug from the outlet, and wipe with a soft, dry cloth.
●
Use a damp cloth to remove stubborn stains, before wiping with a dry cloth.
●
Do not use benzine, thinners, alcohol, or kitchen detergent, as these may damage the
outer casing and finish of the camera.
●
If using a chemically-treated cloth, read the supplied instructions carefully.
●
Do not touch the lens barrier.
Lens barrier
When not using for a while
●
Turn off the camera before removing battery and card (ensure that battery is removed
to prevent damage through over-discharge).
●
Do not leave in contact with rubber or plastic bags.
●
Store together with a drying agent (silica gel) if leaving in drawer, etc. Store batteries in
cool (15 °C to 25 °C (59 °F to 77 °F)) places with low humidity (40%RH to 60%RH) and
no major temperature changes.
●
Charge battery once per year and use completely before storing again.
●
Check all the parts before taking pictures when you have not used the camera for a
long period of time.
Monitor
●
Do not press hard on the monitor. This may cause uneven display and damage the
monitor.
●
In cold climates or other situations when the camera becomes cold, the monitor may
appear slightly darker than normal immediately after the camera is turned on. Normal
brightness will return once the internal components have warmed up.
The monitor is made with extremely high precision technology. However there may be
some dark or bright spots (red, blue or green) on the screen. This is not a malfunction.
The monitor screen is controlled with extremely high precision, but some pixels may
be inactive. The spots will not be recorded on pictures on a card.
To Next Page
Loading...
Need help?
General
