Application (Record)
Entering Text
VQT4T12- 114 -
Use the cursor button to enter names with the Face Recognition function and in Scene
Modes [Baby] and [Pet], or to register locations in [Travel Date] etc.
Use cursor button to select characters
Press [MENU/SET] several times until the desired character is
displayed
Cursor position
Text is inserted at the cursor position.
• To change the character type
→ Select , and press [MENU/SET].
■
Editing text
Use cursor button to select and press [MENU/SET]. Then, move the
cursor to the text to edit
• You can also use the zoom lever to reposition the cursor.
Use cursor button to select [Delete], and then press [MENU/SET]
Use cursor button to select the correct text, and then press [MENU/SET]
When you are finished entering text, use cursor button to
select [Set] and press [MENU/SET]
●
A maximum of 30 characters can be entered. (Maximum of 9 characters for [Face
Recog.] names)
●
Up to 15 characters can be entered for [ ], [ ], [ ], [ ] and [ ]. (Maximum of
6 characters for [Face Recog.] names)
To Next Page
Loading...
