GPS and map functions
DMC-TZ40
DMC-TZ41
Using the GPS function to record the location of a picture
VQT4T12
- 164 -
[Area Info. Set]
You can change the recorded place name information items to be displayed on the
screen.
Select [Area Info. Set] from [GPS] menu and press [MENU/
SET]
Use cursor button to select an item to be changed and press
[MENU/SET]
Use cursor button to set items that you want to display to [ON]
and items that you do not want to display to [OFF] and press
[MENU/SET]
[Airplane Mode]
When [GPS Setting] is [ON], the GPS function remains activated even if the camera is
turned off.
To disable the positioning function when the camera is turned off, set [Airplane Mode] to
[ON].
Select [Airplane Mode] from [Setup] menu and press
[MENU/SET]
Use cursor button to select [ON] and press [MENU/SET]
●
Electromagnetic waves from the camera can affect instruments and meters. In
airplane cabins (during takeoff and landing) or in other restricted areas, set [Airplane
Mode] to [ON], and then turn off the camera.
To Next Page
Loading...
