Panasonic Lumix DMC-TZ37 - Level Shot Function DMC-TZ40 DMC-TZ41; [Wind Cut]

Application (Record)
Using the [Motion Picture] menu
VQT4T12
- 128 -
• For the setting procedures of the menu. (→54)
Level Shot function
DMC-TZ40 DMC-TZ41
Level Shot function automatically detects the camera’s tilt while recording
motion pictures, and horizontally corrects the recording motion picture so it will
not be tilted.
■
Settings: [ON] / [OFF]
●
If you record while walking, or if the camera’s tilt is large, it may not be possible to
horizontally correct the motion pictures.
●
When [Level Shot] is [ON], the recording range will become a little narrower when
starting to record motion pictures.
●
Still pictures taken while recording motion pictures will not be horizontally corrected.
●
The setting is fixed to [OFF] in the following case:
• [High Speed Video] Scene Mode
[Wind Cut]
Automatically detects wind sounds (wind noise) captured by the microphones
and suppresses the sound if the wind is blowing too strongly.
■
Settings: [AUTO] / [OFF]
●
When [Wind Cut] is set to [AUTO], the sound quality may differ from that of normal
recordings.