Panasonic Lumix DMC-TZ37 - [USB Mode]; [Output]; [VIERA Link]

Basics
Using the [Setup] menu
VQT4T12
- 64 -
• For the setting procedures of the menu. (→54)
[USB Mode]
Select communication method for when connecting camera to a computer or printer with
USB connection cable (supplied).
Update the GPS assist data.
DMC-TZ40 DMC-TZ41
■
Settings
[Select on connection]:
Select communication method each time you connect to a computer or PictBridge-
compatible printer.
[PictBridge(PTP)]:
Select when connecting to a PictBridge-compatible printer.
[PC]:
Select when connecting to a computer.
DMC-TZ40 DMC-TZ41
[GPS assist data]:
Select when using this unit to update GPS assist data. (→169)
[Output]
Change the settings to be used when the camera is connected to a TV or other device.
■
Settings
[Video Out]
[NTSC] / [PAL]
[TV Aspect] (This setting performs when an AV cable (optional) is connected.)
/
[VIERA Link]
Enable automatic linking with other VIERA Link-compatible devices, and operability with a
VIERA remote control when connecting via an HDMI micro cable (optional) (→255).
■
Settings
[ON]: Operations may be performed via the remote control of the VIERA Link-
compatible device. (Not all operations will be available.)
Operability of the camera’s own buttons will be limited.
[OFF]: Operations must be performed via the camera’s own buttons.