GPS and map functions
DMC-TZ40
DMC-TZ41
Changing the recorded GPS information
VQT4T12- 166 -
[Edit Location]
You can edit the location information (latitude and longitude) recorded on still pictures and
motion pictures.
• When you edit the location information, the place name information is deleted.
Preparation:
Before editing the location information using map data, be sure to copy the map data on
the supplied disc to a memory card. (→180)
Select [Edit GPS Data] from the [Playback] menu or [Map]
menu and press [MENU/SET]
Use cursor button to select a picture and press [MENU/SET]
Use cursor button to select [Edit Location] and press
[MENU/SET]
Use cursor button to select an editing method and press
[MENU/SET]
[Point on map] Display recording location in the centre and press [MENU/SET]
[Use another picture]
Select a picture and press [MENU/SET]
Display recording location in the centre and press [MENU/SET]
[Repeat] The location information that was edited last will be displayed.
• About map operation (→175)
• A confirmation screen will appear. Select [Yes] to overwrite the location
information.
●
The location information of a position specified on a map may deviate from the actual
latitude and longitude coordinates.
To Next Page
Loading...
