Application (Record)
Using the [Rec] menu
VQT4T12
- 116 -
• For the setting procedures of the menu. (→54)
[Quality]
Set quality of picture.
■
Settings: ([Fine]) High quality, priority to picture quality
([Standard]) Standard quality, priority to the number of pictures
●
The setting is fixed to , in [High Sens.] Scene Mode.
●
When [3D Photo Mode] Scene Mode is selected, the displayed icons are different:
([3D+Fine]): An MPO picture and a high quality JPEG picture are recorded
simultaneously.
([3D+Standard]): An MPO picture and a standard quality JPEG picture are
recorded simultaneously.
[Sensitivity]
Set ISO Sensitivity (sensitivity to lighting) manually.
We recommend higher settings to take clear pictures in darker locations.
■
Settings: [AUTO] / / [100] / [200] / [400] / [800] / [1600] / [3200] / [H.6400]
*
Setting guide
[Sensitivity] [100]
[H.6400]
*
Location
(recommended)
Bright
(outdoors)
Dark
Shutter speed Slow Fast
Interference Low High
Subject blur High Low
●
[AUTO] is automatically set in a range up to 1600 based on subject brightness.
●
is automatically set in a range up to 1600 based on subject movement and
brightness.
●
The [Sensitivity] is automatically set in the following cases:
• When recording motion pictures
• When [Burst] is set to
●
The shutter speed is restricted as follows based on the [Sensitivity] setting.
[Sensitivity] Shutter speed
AUTO /
Automatically changes depending on the [Sensitivity] setting.
100 / 200 / 400 4 - 1/2000th
800 / 1600 1 - 1/2000th
3200 / H.6400
*
1/4 - 1/2000th
●
Cannot select in [Shutter-Priority] Mode.
●
Cannot select [AUTO] or in [Manual Exposure] Mode.
*
Only when [Extended ISO] is [ON].
To Next Page
Loading...
