Panasonic Lumix DMC-TZ37 - [Format]; [Language]

Basics
Using the [Setup] menu
VQT4T12
- 66 -
• For the setting procedures of the menu. (→54)
[Format]
Use when [Built-In Memory Error] or [Memory Card Error] appears, or when formatting
the built-in memory or card.
When a card/built-in memory is formatted, the data cannot be restored. Check the
content of the card/built-in memory carefully before formatting.
●
When formatting the built-in memory, remove the cards.
(Only inserted card will be formatted if present; built-in memory will be formatted if no
card is inserted.)
●
Always format cards with this camera.
●
All data including protected pictures and copied map data will be deleted.
DMC-TZ40 DMC-TZ41
●
All protected pictures and other picture data will be deleted.
DMC-TZ37
●
Do not turn off the camera or perform other operations during formatting.
●
Formatting the built-in memory may take several minutes.
●
If you cannot format, contact the dealer or your nearest Service Centre.
[Language]
Change display language.
Set the language displayed on the screen.