Panasonic Lumix DMC-TZ37 - When Connecting with [WPS (PIN Code)]; If You Are Not Sure about the WPS Compatibility (Connecting by [Manual Connection])

Wi-Fi
Connecting via a wireless access point
VQT4T12
- 206 -
When connecting with [WPS (PIN code)]
Use cursor button to select the wireless access point you are
connecting to, and press [MENU/SET]
Enter the PIN code displayed on the camera screen into the
wireless access point
Press [MENU/SET]
• Refer to the wireless access point instruction manual for details.
If you are not sure about the WPS compatibility
(connecting by [Manual Connection])
Search for available wireless access points.
• Confirm encryption key of the selected wireless access point if the network
authentication is encrypted.
• When connecting by [Manual Input], confirm SSID, encryption type, encryption key of
the wireless access point you are using.
Use cursor button to select the wireless access point you are
connecting to, and press [MENU/SET]
• Pressing [DISP.] button will search for a wireless access
point again.
• If no wireless access point is found, refer to “When
connecting with [Manual Input]” (→207).
(If network authentication is encrypted)
Enter the encryption key
• For details on how to enter characters, refer to “Entering Text” (→114).