Advanced (Recording pictures)
- 78 -
About focusing
When [CONTINUOUS AF] (P112) is set to [ON], and you focus on a subject, the camera
will maintain focus on that subject. To fix the focus position when beginning to record a
motion picture, set to [OFF].
Start recording by pressing the motion
picture button.
Available recording time
Elapsed recording time
• After pressing the shutter button fully, release it
straight away.
• The audio is also recorded simultaneously from the
built-in microphone on this unit. (Motion pictures
cannot be recorded without audio.)
• The recording state indicator (red) will flash while
recording motion pictures.
• The screen will become dark momentarily, and
recording will start after adjusting the display.
Stop the recording by pressing the motion picture button again.
• Sound will go off when pressing the motion picture button indicating start/stop of motion
picture recording.
Sound volume can be set in [BEEP LEVEL] (P25).
• If the built-in memory or the card becomes full in the middle of recording, the camera
stops recording automatically.
To Next Page
Loading...
