- 79 -
Advanced (Recording pictures)
Note
•
The screen will change as following when the motion picture button is pressed in steps 3 and
4.
1 Press [DISPLAY] to display the available recording time before recording motion pictures.
2 The screen that is displayed during Motion Picture Mode setting is different depending on the
setting of the
[REC MODE].
• Refer to P112 for the [MOTION PICTURE] Mode menu.
• The flash setting is fixed to [Œ].
• Refer to P184 for information about the available recording time.
• The available recording time displayed on the screen may not decrease regularly.
• Depending on the type of the card, the card access indication may appear for a while after
recording motion pictures. This is not a malfunction.
• The operational sound of the zoom or button operation may be recorded when it is operated
during the recording of a motion picture.
• The screen may be blacked out momentarily, or the unit may record noise due to static
electricity or electromagnetic waves etc. depending on the environment of the motion picture
recording.
• When operating the zoom in recording motion pictures, it may take time to come into focus.
• If the Extended Optical Zoom was used before pressing the motion picture button, recordable
area will be changed drastically since these set ings are canceled.
• When the aspect ratio setting is different in still and motion pictures, the angle of view changes
at the start of mo ion picture recording. When [ REC AREA] (P26) is set to [ON], angle of
view during motion picture recording is displayed.
• [STABILIZER] is fixed to [MODE1] in recording motion pictures.
• In recording motion pictures, the following functions cannot be used.
– [], [], [ƒ] and [Ù] in [AF MODE]
– Direction Detection function
–
Extended
Optical Zoom
– [FACE RECOG.]
• It is recommended to use a fully charged battery or AC adaptor (optional) when recording
motion pictures.
• If while recording motion pictures using the AC adaptor (optional) the power supply is cut off
due to a power cut or if the AC adaptor (optional) is disconnected etc., the motion picture being
recorded will not be recorded.
• Zoom speed may be slower than normal.
Still picture recording
screen
1
Motion picture mode
setting
2
Motion picture
recording screen
Still picture mode
setting
To Next Page
Loading...
Need help?
General
