Panasonic LZ2 - Detailed Settings Function

Mini VRF SYSTEM
Remote Controller Functions
5 - 9
2. Detailed Settings Function
5
Maintenance func
XX / XX
[ ][ ]
ECONAVI
nanoeX
RC. setting mode
Maintenance func
XX / XX
[ ][ ]
Simple settings
Detailed settings
Auto address
Detailed settings
[ ][ ]
Unit no.
Code no.
1-1
000010
Set data 00010001
Detailed settings
[ ][ ]
Unit no.
Code no.
1-1
000010
Set data 00010001
]
Detailed settings
[ ]
Unit no.
Code no.
1-1
000010
Set data 00010001
]
Confrm
[ ]
Detailed settings
[ ][ ]
Unit no.
Code no.
1-1
10
Set data 00010001
Detailed settings
[ ][ ]
Unit no.
Code no.
1-1
000010
Set data 00010001
Exit detailed
settings
and restart?
YES
NO
Select “Detailed settings” on the LCD display and press the
After selecting “Unit no.”, press the
Detailed Settings Function
<Procedure of CZ-RTC6 series>
Stop the system before performing these steps.
(1) Keep pressing the
This allows the system address, indoor unit address, and other settings to be made for the individual or group-control
indoor unit to which the remote controller used for detailed settings is connected.
When detailed settings mode is engaged, operation stops at the individual or group-control indoor unit where the
remote controller used for detailed settings is connected. Simple settings items can also be set at this time.
, and
4 or more second
The “Maintenance func” screen appears on the LCD display.
s.
buttons simultaneously for
(2) Press the or button to see each menu.
button.
The “Detailed settings” screen appears on the LCD display.
The “Detailed settings” screen appears on the LCD display (proceed to
Step (6)).
(3) Select the “Unit no.” by pressing the
or button.
button and proceed to Step (4).
(4) Select the “Code no.” by pressing the
After selecting “Code no.”, press the
or button.
button and proceed to Step (5).
If the
button is pressed, proceed to Step (6).
button.
(5) Select the “Set data” by pressing the
After selecting “Set data”, press the
or button.
NOT E
(6) If the button is pressed under the display, the following
display (Detailed setting-end screen) appears.
Then select “YES” by pressing the or button and
press the button. (Return to normal remote controller
display.)
SM830289-01_欧州向け R32 mini VRF 8,10HP SM&TRSM.indb 9SM830289-01_欧州向け R32 mini VRF 8,10HP SM&TRSM.indb 9 2021/05/07 10:16:132021/05/07 10:16:13