Panasonic NV-SD350 - Page 13

a
21 RESET
To reset the tape counter (elapsed time) to “0:00.00”.
The tape counter is automatically reset to “0:00,00°
when a video cassette is inserted.
22 CHECK
To check timer programmes.
23 ZERO STOP
For the zero stop function.
24 CANCEL
To cancel the settings made for a timer recording.
25 INPUT SELECT
To select the A1, A2 or A3 external recording source.
To select the tape speed desired for recording.
SP gives the best picture quality.
LP gives the longest recording time.
27 TY SELECT
To set the remote controller for operation of the TV.
28 EXIT
To make On Screen Display disappear on the TV
screen.
29 STORE
To make seiections from Gn Screen Dispiay.
30 av <P>
To make selections from On Screen Display.
31 MENU
To make On Screen Display Main Menu appear on
the TV screen.
32 Programme Position Selector Buttons
e@To select the programme positions (1-99).
>
1: Z)-CD-CD
eTo enter a PlusCode.
33 VIDEO PLUS+
For the Video Plus+ programming.
34 TIMER REC
To turn the timer recording function on and off.
(4 is fit or not lit.
Once operating timer recording function, the normal
VCR operation is not possible unless this button is set
to off.
35 OFF
@To programme a timer recording.
e@To set the manufacturer number of the TV.
36 ON
To programme a timer recording.
Infra-red Remote Controller
Setting Up
How to select the remote control mode
This remote controller has two remote control modes
VCR1 and VCR2.
(A) Remote controi mode VCR1:
Press & while holding TV SELECT.
Set to this position on both the VCR and remote
controller for normal use with one VCR.
@ Remote contro! mode VCR2:
Press ¥ while holding TV SELECT.
Set to this position when using two Panasonic
VCRs.
© When the VCR mode is not known: Point the remote
controller at the VCR and proceed with step @) or @). If
the mode established matches the VCR mode, the
VCR's power supply operates.
Refer to page 38 as well.
Power Source for the Remote Controller
The remote controller is powered by 2 “AA", “UM3" or *R6"
size batteries. The life of the batteries is about one year,
although this depends on the frequency of use.
Precautions for Battery Replacement
Load the new batteries with their polarity (CE and S)
aligned correctly.
®Do not apply heat to the batteries, or an internat
short-circuit may occur.
elf you do not intend to use the remote controller for a
long period of time, remove the batteries and store them
in a cool and dry place.
eRemove spent batteries immediately and dispose of
them.
eDo not use an old and a new battery together, and never
use an alkaline battery with a manganese battery.
installing the Batteries
{43)