Panasonic PT-MZ680

Chapter 4 Settings — [DISPLAY OPTION] menu
ENGLISH - 101
3) Press
as
to select [OSD MEMORY].
4) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[ON]
Holds the cursor position.
[OFF]
Does not hold the cursor position.
Note
f
Even if [ON] is set, the cursor position is not maintained when the power is turned off.
Setting [INPUT GUIDE]
Set whether to display the input guide in the position set in [OSD POSITION].
Input guide is a screen to display information such as the currently selected input terminal name, signal name,
memory number, etc.
1) Press
as
to select [ON-SCREEN DISPLAY].
2) Press the <ENTER> button.
f
The
[ON-SCREEN DISPLAY]
screen is displayed.
3) Press
as
to select [INPUT GUIDE].
4) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[ON]
Displays the input guide.
[OFF]
Hides the input guide.
Setting [WARNING MESSAGE]
Set the display/hide of the warning message.
1) Press
as
to select [ON-SCREEN DISPLAY].
2) Press the <ENTER> button.
f
The
[ON-SCREEN DISPLAY]
screen is displayed.
3) Press
as
to select [WARNING MESSAGE].
4) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[ON]
Displays the warning message.
[OFF]
Hides the warning message.
Note
f
When [OFF] is set, a warning message is not displayed on the projected image even if a warning condition such as [TEMPERATURE
WARNING] is detected while using the projector.
The message prompting to clean/replace the lter is not displayed either.
[SIGNAL SEARCH]
Enable/disable the signal search function.
If the signal search function is enabled, the input with input signal is automatically selected and projection is
started when the projector is turned on. Also, when the currently selected input has no signal, the projector will
automatically switch to the input with input signal when the <AUTO SETUP/CANCEL> button is pressed.
1) Press
as
to select [SIGNAL SEARCH].
2) Press
qw
to switch the item.
f
The items will switch each time you press the button.