Panasonic PT-MZ680

Chapter 7 Appendix — Specications
ENGLISH - 197
Specications
The specications of the projector are as follows.
Display system
Translucent screen LCD panel x 3, 3 primary colors system
Display
device
Size of effective display
area
19.3 mm (0.76") (aspect ratio 16:10)
Number of pixels
2 304 000 pixels (1 920 x 1 200 dots)
Projection
lens
Supplied projection lens
Throw ratio: 1.6 to 2.8:1
F = 1.7 to 2.3
f = 26.8 mm to 45.5 mm
Zoom
Powered
Focus
Powered
Lens shift
Powered (Horizontal/Vertical)
Changeable lens
Yes
Light source
Laser diode
Screen size
1.02 m (40") to 10.16 m (400")
1.52 m (60") to 10.16 m (400") with ET-ELW22
Light output
*1 *2
PT-MZ880 8 000 lm
When [PICTURE MODE] is set to [DYNAMIC] and [LIGHT
POWER] in [ECO MANAGEMENT] is set to [NORMAL]
PT-MZ780 7 000 lm
PT-MZ680 6 000 lm
PT-MZ880 5 600 lm
When [PICTURE MODE] is set to [DYNAMIC] and [LIGHT
POWER] in [ECO MANAGEMENT] is set to [ECO] or [QUIET]
PT-MZ780 4 900 lm
PT-MZ680 4 200 lm
Contrast ratio
*1
3 000 000:1
When [PICTURE MODE] is set to [DYNAMIC], [DYNAMIC
CONTRAST] is set to [1] or [2], and HDMI signal is input
Center to corner zone ratio
*1
85%
Displayable
scanning
frequency
Horizontal
27 kHz to 135 kHz
Vertical
24 Hz to 60 Hz
Input
compatibility
HDMI signal input
Moving image signal resolution: 480/60p, 576/50p to 4 096 x 2 160/60p
Still image signal resolution: 640 x 480 to 1 920 x 1 200 (non-interlace)
Dot clock frequency: 25 MHz to 594 MHz
DIGITAL LINK signal
input
Moving image signal resolution: 480/60p, 576/50p to 4 096 x 2 160/60p
Still image signal resolution: 640 x 480 to 1 920 x 1 200 (non-interlace)
Dot clock frequency: 25 MHz to 297 MHz
RGB signal input
Resolution: 640 x 480 to 1 920 x 1 200
Dot clock frequency: 162 MHz or less
PIAS (Panasonic Intelligent Auto Scanning) system
YC
B
C
R
/YP
B
P
R
signal
input
Resolution: 480/60p, 576/50p to 1 920 x 1 080
Dot clock frequency: 148.5 MHz or less
The HD/SYNC and VD terminals do not support 3 value SYNC.
*1 Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118:2020 international standards.
*2 Value is for the supplied standard zoom lens. The value varies depending on the lens.