Panasonic PT-MZ680

Chapter 5 Operations — Updating the rmware
166 - ENGLISH
Updating the rmware
The rmware of the projector can be updated via LAN.
Check the Panasonic website (https://panasonic.net/cns/projector/pass/) for availability of the rmware that can be
updated. Customer can update the rmware if a newer version than the current rmware version is published.
It is necessary to register and log in to PASS
*1
to conrm the availability of the rmware that can be updated or to
download the rmware.
*1 PASS: Panasonic Professional Display and Projector Technical Support Website
For details, visit the Panasonic website (https://panasonic.net/cns/projector/pass/).
r
Firmware that can be updated
Main version
r
How to conrm the rmware version
Current rmware version can be conrmed by pressing the <STATUS> button on the remote control and displaying
the
[STATUS]
screen.
The rmware version can also be conrmed in the [PROJECTOR SETUP] menu → [STATUS].
1/3
RETURN
EXITCHANGE
ENTER
SEND E-MAIL
SELF TEST
NO ERRORS
LIGHT TEMP. 2
LIGHT TEMP. 1
EXHAUST AIR TEMP.
INTAKE AIR TEMP.
MAIN/SUB VERSION
LIGHT RUNTIME
CONTINUOUS LIGHTING TIME
SERIAL NUMBER
PROJECTOR RUNTIME
PROJECTOR TYPE
STATUS
SW1234567
10h
10h
1h 23m
1.00 / 1.00
31°C/87°F
31°C/87°F
31°C/87°F
31°C/87°F
PT-MZ880
Main version
Note
f
A LAN cable is required to connect to the network via wired LAN.
Updating the rmware via LAN
Example of network connection
Computer
Projector
LAN cable (straight) LAN cable (straight)
Switching hub
Attention
f
When a LAN cable is directly connected to the projector, the network connection must be made indoors.
Note
f
A LAN cable is required to connect to the network via wired LAN.
f
Connect a LAN cable to the <LAN> terminal or the <DIGITAL LINK/LAN> terminal of the projector.