Panasonic PT-MZ680

Chapter 4 Settings — [DISPLAY OPTION] menu
106 - ENGLISH
2) Press the <ENTER> button.
f
The
[P-TIMER]
screen is displayed.
3) Press
as
to select an item, and press the <ENTER> button.
[START]
Starts the count.
[STOP]
Stops the count.
[RESTART]
Restarts the count.
[RESET]
Resets the count.
[EXIT]
Ends the presentation timer.
f
Elapsed time or remaining time is displayed in the bottom right of the projected image when [START] or
[RESTART] is selected.
f
The elapsed time or remaining time when it was stopped is displayed in the bottom right of the projected
image when [STOP] is selected.
Note
f
The presentation timer can be operated by the <P-TIMER> button on the remote control. (
x
page 67)
f
The security message set in the [SECURITY] menu
→
[DISPLAY SETTING] (
x
page 130) is not displayed while the elapsed time or
remaining time is displaying.
f
The elapsed time or remaining time is not displayed while the menu screen is displayed.
f
When [MODE] is set to [COUNT UP], the start time will be “000:00”.
f
When [MODE] is set to [COUNT DOWN], the start time will be the value set in [TIMER].
f
The timer gauge will turn clockwise when set to [COUNT UP], and turn counterclockwise when set to [COUNT DOWN].
[FREEZE]
The projected image is paused and audio is turned off regardless of the playback of the external device.
1) Press
as
to select [FREEZE].
2) Press the <ENTER> button.
f
Press the <MENU> button or the <RETURN> button to clear.
Note
f
[FREEZE] is displayed on the screen when video is paused.
f
Operation of [FREEZE] can also be performed with the <FREEZE> button on the remote control. (
x
page 64)
[DIGITAL ZOOM]
(When RGB signal for still images, HDMI signal for still images, or DIGITAL LINK signal for still images is input.)
1) Press
as
to select [DIGITAL ZOOM].
2) Press the <ENTER> button.
f
The
[DIGITAL ZOOM]
individual adjustment screen is displayed.
3) Press
qw
to adjust the magnification factor.
f
The magnication factor can be adjusted from 1.0 times to 3.0 times in 0.1 intervals.
4) Press the <ENTER> button.
f
The move screen is displayed.
5) Moving the enlargement area
f
For details, refer to “Using the digital zoom function” (
x
page 66).
Note
f
The digital zoom is canceled when the <AUTO SETUP/CANCEL> button on the remote control or the <LENS/CANCEL> button on the
control panel is pressed while performing the digital zoom.
f
The adjustment value of the digital zoom is canceled when the type of input signal is changed while performing the digital zoom.
f
The freeze function is disabled while performing the digital zoom.
f
The digital zoom will not operate in some of the still image signals.