Panasonic PT-MZ680

Chapter 4 Settings — [PROJECTOR SETUP] menu
120 - ENGLISH
3) Press
as
to select item to set in [AUDIO IN SELECT].
[COMPUTER]
Sets the audio to output when COMPUTER is input.
[HDMI1]
Sets the audio to output when HDMI1 is input.
[HDMI2]
Sets the audio to output when HDMI2 is input.
[HDMI3]
Sets the audio to output when HDMI3 is input.
[DIGITAL LINK]
Sets the audio to output when DIGITAL LINK is input.
4) Press
qw
to switch the item.
f
The items will switch each time you press the button.
f
The item is xed to [AUDIO IN] when [COMPUTER] is selected.
[AUDIO IN]
Audio connected to the <AUDIO IN> terminal is output during projection of image from the set input
terminal.
[HDMI1 AUDIO IN]
*1
Audio input to HDMI1 is output.
[HDMI2 AUDIO IN]
*2
Audio input to HDMI2 is output.
[HDMI3 AUDIO IN]
*3
Audio input to HDMI3 is output.
[DIGITAL LINK AUDIO IN]
*4
Audio input to DIGITAL LINK is output.
*1 Only when the input signal is HDMI1
*2 Only when the input signal is HDMI2
*3 Only when the input signal is HDMI3
*4 Only when the input signal is DIGITAL LINK
[FILTER COUNTER]
Check the runtime of the lter and set the cleaning/replacement cycle of the lter. Also, the runtime of the lter can
be reset.
1) Press
as
to select [FILTER COUNTER].
2) Press the <ENTER> button.
f
The
[FILTER COUNTER]
screen is displayed.
[FILTER COUNTER]
Displays the runtime of the lter.
[TIMER]
Sets the cleaning/replacement cycle of the lter.
[FILTER COUNTER RESET]
Resets the runtime of the lter.
Setting [TIMER]
If the lter is to be cleaned/replaced periodically, set the cycle in hours. Once the runtime of the lter reaches
the set time, a message prompting to clean/replace the lter [FILTER COUNTER has reached the set time.] is
displayed on the projected image.
1) Press
as
to select [FILTER COUNTER].
2) Press the <ENTER> button.
f
The
[FILTER COUNTER]
screen is displayed.
3) Press
as
to select [TIMER].
4) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[OFF]
Select this item when a message is not to be displayed.
[1000 H] - [20000 H]
Select this item when a message is to be displayed. The cleaning/replacement cycle of the lter can
be set in 1 000 hour intervals.
Resetting [FILTER COUNTER]
Reset the runtime of the lter.
1) Press
as
to select [FILTER COUNTER].