Panasonic PT-MZ680

Chapter 4 Settings — [PROJECTOR SETUP] menu
ENGLISH - 119
Operation Adjustment Range of adjustment
Press
w
. Increases the volume on the right.
L16 - R16
Press
q
. Increases the volume on the left.
Setting audio output in the standby mode
1) Press
as
to select [AUDIO SETTING].
2) Press the <ENTER> button.
f
The
[AUDIO SETTING]
screen is displayed.
3) Press
as
to select [IN STANDBY MODE].
4) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[OFF]
Audio is not output during standby.
[ON]
Audio is output during standby.
Note
f
Audio is not output in the standby mode when the [PROJECTOR SETUP] menu
→
[ECO MANAGEMENT]
→
[STANDBY MODE] is set to
[ECO].
Setting audio output while using the shutter function
1) Press
as
to select [AUDIO SETTING].
2) Press the <ENTER> button.
f
The
[AUDIO SETTING]
screen is displayed.
3) Press
as
to select [IN SHUTTER].
4) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[OFF]
Audio is not output while using the shutter function (shutter: closed).
[ON]
Audio is output while using the shutter function (shutter: closed).
Setting mute mode
1) Press
as
to select [AUDIO SETTING].
2) Press the <ENTER> button.
f
The
[AUDIO SETTING]
screen is displayed.
3) Press
as
to select [MUTE].
4) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[OFF]
Audio is output.
[ON]
Audio is not output.
Setting audio input from a connected device
1) Press
as
to select [AUDIO SETTING].
2) Press the <ENTER> button.
f
The
[AUDIO SETTING]
screen is displayed.