Panasonic PT-MZ680

Chapter 5 Operations — Using the data cloning function
162 - ENGLISH
Using the data cloning function
Operate the data cloning function. The setting and adjustment values of one projector can be copied to multiple
projectors via LAN.
r
Data that cannot be copied
Following settings can not be copied. Set these in each projector.
f
The [DISPLAY OPTION] menu
→
[UNIFORMITY]
f
The [PROJECTOR SETUP] menu
→
[PROJECTOR ID]
f
The [PROJECTOR SETUP] menu
→
[DATE AND TIME]
→
[ADJUST CLOCK]
f
The [PROJECTOR SETUP] menu
→
[DATA CLONING]
→
[WRITE PROTECT]
f
The [SECURITY] menu
→
[MENU LOCK]
f
The [SECURITY] menu
→
[SECURITY PASSWORD]
f
The [SECURITY] menu
→
[CONTROL DEVICE SETUP]
f
The [NETWORK] menu
→
[WIRED LAN]
f
The [NETWORK] menu
→
[PROJECTOR NAME]
f
The [NETWORK] menu
→
[ADMINISTRATOR ACCOUNT]
f
The [NETWORK] menu
→
[NETWORK SECURITY]
→
[COMMAND PROTECT]
f
The [NETWORK] menu
→
[PJLink]
→
[PJLink PASSWORD]
f
Security password
f
Menu lock password
f
Operation setting password
f
“[Network security] page” (
x
page 155) in the web control screen
f
“[E-mail set up] page” (
x
page 155) in the web control screen
f
“[Authentication set up] page” (
x
page 156) in the web control screen
f
“[Crestron tools] page” (
x
page 159) in the web control screen
f
Password set in “[Set up password] page” (
x
page 159) of the web control screen
Note
f
The data cloning function will not operate when the models of the projectors are different. For example, data of PT-MZ880 can be copied to
other PT-MZ880 projectors, but it can not be copied to PT-MZ780. Data cloning is limited to the same model.
Copying the data to other projector via LAN
Make the following settings on the projector as the data copy destination in advance. For details, refer to "Setting
[WRITE PROTECT]". (
x
page 163)
f
The [PROJECTOR SETUP] menu
→
[DATA CLONING]
→
[WRITE PROTECT]
→
[OFF]
Note
f
To use the network function with the projector, it is necessary to set the password of the administrator account. (
x
page 137)
When a password is not set for the administrator account (when blank), the network function of the projector cannot be used. To copy the
data via LAN, set the passwords for the copy source projector and the copy destination projector.
1) Connect all projectors to the switching hub using LAN cables. (
x
page 145)
2) Turn on all the projectors.
3) On the copy source projector, press
as
to select [DATA CLONING].
4) Press the <ENTER> button.
f
The
[SECURITY PASSWORD]
screen is displayed.
5) Enter a security password and press the <ENTER> button.
f
The
[DATA CLONING]
screen is displayed.
6) Press
as
to select [SELECT PROJECTOR].
7) Press the <ENTER> button.
f
The projector in the same subnet is displayed as a list.
8) Press
as
to select the copy destination projector.