Panasonic PT-MZ680

Chapter 4 Settings — [DISPLAY OPTION] menu
ENGLISH - 103
5) Press the <ENTER> button.
f
The
[UNIFORMITY:USER CORRECTION]
screen is displayed.
6) Press
as
to select [ADJUSTMENT LEVEL].
7) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[1] - [8]
Select the signal level (target brightness to adjust).
The entire screen becomes darker when the value gets larger.
f
If you press w while the adjustment level is [8], the level will become [1]. If you press q while the adjustment
level is [1], the level will become [8].
8) Press
as
to select [TEST PATTERN].
9) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[ON]
Displays the test pattern.
[OFF]
Does not display the test pattern.
10) Press
as
to select the adjustment area ([UPPER LEFT], [UPPER RIGHT], [LOWER LEFT], [LOWER
RIGHT], [UPPER], [LOWER], [LEFT], or [RIGHT]).
11) Press the <ENTER> button.
f
The adjustment screen of [RED], [GREEN], or [BLUE] for the item selected in Step
10)
is displayed.
12) Press
as
to select [RED], [GREEN], or [BLUE].
13) Press
qw
to adjust the level.
Item Operation Adjustment Range of adjustment
[RED]
Press w. Red becomes darker.
-31 - +31
(Factory default setting: 0)
Press q. Red becomes lighter.
[GREEN]
Press w. Green becomes darker.
Press q. Green becomes lighter.
[BLUE]
Press w. Blue becomes darker.
Press q. Blue becomes lighter.
f
To adjust the color unevenness for each adjustment level, repeat Steps
6)
to
13)
.
f
To adjust the color unevenness for each adjustment area, repeat Steps
10)
to
13)
.
Initializing adjustments for [USER CORRECTION]
Return the color unevenness settings of all adjustment areas in the specied [ADJUSTMENT LEVEL] to the
factory default values.
1) Press
as
to select [UNIFORMITY].
2) Press the <ENTER> button.
f
The
[UNIFORMITY]
screen is displayed.
3) Press
as
to select [USER CORRECTION].
4) Press
qw
to select [ON], and press the <ENTER> button.
f
The
[UNIFORMITY:USER CORRECTION]
screen is displayed.
5) Press
as
to select [ADJUSTMENT LEVEL].
6) Press
qw
to switch the [ADJUSTMENT LEVEL] to initialize.
7) Press
as
to select [INITIALIZE].
8) Press the <ENTER> button.
f
The conrmation screen is displayed.