Panasonic PT-MZ680

Chapter 4 Settings — [NETWORK] menu
ENGLISH - 141
f
The
[PJLink PASSWORD]
screen is displayed.
4) Press
as
to select [PASSWORD] under [CURRENT], and press the <ENTER> button.
f
The
[PASSWORD]
screen is displayed.
5) Press
asqw
to select a character, and press the <ENTER> button.
f
Enter the current password.
f
The factory default setting of password is blank.
6) After entering the password, press
asqw
to select [OK], and press the <ENTER> button.
f
The
[PJLink PASSWORD]
screen is displayed.
7) Press
as
to select [PASSWORD] under [NEW], and press the <ENTER> button.
f
The
[PASSWORD]
screen is displayed.
8) Press
asqw
to select a character, and press the <ENTER> button.
f
Enter a new password.
f
Up to 32 alphanumeric characters can be entered.
9) After entering the password, press
asqw
to select [OK], and press the <ENTER> button.
f
The
[PJLink PASSWORD]
screen is displayed.
10) Press
as
to select [PASSWORD CONFIRM], and press the <ENTER> button.
f
The
[PASSWORD CONFIRM]
screen is displayed.
11) Enter the password entered in Step 8).
12) After entering the password, press
asqw
to select [OK], and press the <ENTER> button.
f
The
[PJLink PASSWORD]
screen is displayed.
13) Press
as
to select [STORE], and press the <ENTER> button.
f
The conrmation screen is displayed.
14) Press
qw
to select [OK], and press the <ENTER> button.
Note
f
The PJLink password can also be changed on the [Set up password] page (
x
page 159) of the web control screen.
[PJLink CONTROL]
Set to enable or disable the PJLink protocol control function.
1) Press
as
to select [PJLink].
2) Press the <ENTER> button.
f
The
[PJLink]
screen is displayed.
3) Press
as
to select [PJLink CONTROL].
4) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[ON]
Enables PJLink protocol control function.
[OFF]
Disables PJLink protocol control function.
[PJLink NOTIFICATION]
Set to enable or disable the PJLink notication function.
1) Press
as
to select [PJLink].
2) Press the <ENTER> button.
f
The
[PJLink]
screen is displayed.
3) Press
as
to select [PJLink NOTIFICATION].