Panasonic PT-MZ680

Chapter 5 Operations — Network connection
ENGLISH - 147
4) Perform the [WIRED LAN] setting.
f
For details, refer to [WIRED LAN] (
x
page 136).
Note
f
To connect to an existing network, perform after consulting your network administrator.
r
Factory default setting
f
Following is preset as the factory default setting.
[DHCP]
OFF
[IP ADDRESS]
192.168.0.8
[SUBNET MASK]
255.255.255.0
[DEFAULT GATEWAY]
192.168.0.1
[DNS1]/[DNS2]
None
Operating the computer
1) Turn on the power of the computer.
2) Perform the network setting following the instruction of your network administrator.
f
Operation from the computer is possible by conguring the network setting of the computer as follows if the
projector is in the factory default setting.
[IP ADDRESS]
192.168.0.10
[SUBNET MASK]
255.255.255.0
[DEFAULT GATEWAY]
192.168.0.1