Panasonic PT-MZ680

18 - ENGLISH
Features of the Projector
High picture quality and rich color
reproduction
▶
High luminance of 8000 lm
*1*2
and rich
color reproducibility are achieved by the
new optical design; natural and true-to-life
images are reproduced utilizing the original
image processing technology.
*1 PT-MZ880: 8 000 lm
PT-MZ780: 7 000 lm
PT-MZ680: 6 000 lm
*2 When [PICTURE MODE] is set to [DYNAMIC] and [LIGHT
POWER] is set to [NORMAL]
System exibility and versatile
space creation
▶
Low operating noise
*1
allows you to
concentrate on the content; wide shift range
expands the installation exibility, and the
edge blending function realizes versatile
space creation.
*1 When [LIGHT POWER] is set to [QUIET], the noise level is 27 dB
for PT-MZ880, and 26 dB for PT-MZ780 and PT-MZ680.
Eco-friendly design
▶
Power consumption is lowered compared
with the preceding PT-MZ770 series. In
addition, up to 20,000 hours
*1
long-term
operation of the lter is achieved, reducing
total cost of ownership (TCO) as well as
waste.
*1 This is an estimated usage time until the brightness decreases
to approximately half of that at the time of delivery when the
projector is used with [LIGHT POWER] set to [NORMAL] and
[DYNAMIC CONTRAST] set to [2], using IEC 62087:2008
Broadcast contents, and under the environment of dust 0.15 mg/
m
3
at 30 °C (86 °F) and an altitude of 700 m (2 297').
Quick Steps
For details, refer to the corresponding pages.
1. Set up the projector.
(
x
page 33)
2. Connect with external devices.
(
x
page 43)
3. Connect the power cord.
(
x
page 49)
4. Switch on the projector.
(
x
page 51)
5. Make initial settings.
(
x
page 52)
f
Take this step when you switch on the
power for the rst time after purchasing the
projector.
6. Select the input signal.
(
x
page 59)
7. Adjust the image.
(
x
page 60)