Chapter 4 Settings — [POSITION] menu
ENGLISH - 87
Adjusting to desired linearity
1) Press
as
to select [SCREEN ADJUSTMENT].
2) Press
qw
to select [CORNER CORRECTION].
3) Press the <ENTER> button.
f
The
[CORNER CORRECTION]
screen is displayed.
4) Press
as
to select [LINEARITY].
5) Press
qw
to select [MANUAL].
6) Press the <ENTER> button.
f
The
[LINEARITY]
screen is displayed.
7) Press
asqw
to adjust.
Note
f
Depending on the correction value, the aspect ratio of the image may change.
f
The picture quality will degrade more when the correction for [SCREEN ADJUSTMENT] increases, making it harder to focus. Install the
projector so that the correction will be as small as possible.
f
Image size will also change when [SCREEN ADJUSTMENT] is used to perform various adjustments.
f
If [SCREEN ADJUSTMENT] and the adjustment in the [ADVANCED MENU] menu → [EDGE BLENDING] are used together, the edge
blending may not be adjusted correctly depending on the environment.
f
The image may disappear for a moment or may be disrupted while performing adjustment, but this is not a malfunction.
To Next Page
Loading...
