Panasonic PT-RZ120

Chapter 7 Appendix — Precautions for attaching the Ceiling Mount Bracket
ENGLISH - 217
Precautions for attaching the Ceiling Mount Bracket
f When installing the projector to the ceiling, be sure to use the optional Ceiling Mount Bracket (Model No.:
ET-PKD120H (for High Ceilings), ET-PKD120S (for Low Ceilings), ET-PKD130H (for High Ceilings, 6-axis
Adjustment), ET-PKD130B (Projector Mount Bracket)) specied by Panasonic. The Ceiling Mount Bracket
(Model No.: ET-PKD120H (for High Ceilings), ET-PKD120S (for Low Ceilings), ET-PKD130H (for High Ceilings,
6-axis Adjustment)) is used in combination with the Ceiling Mount Bracket (Model No.: ET-PKD130B (Projector
Mount Bracket)).
f Attach the drop-prevention set (at washer and wire rope) that comes with the Ceiling Mount Bracket to the
projector. If you need the drop-prevention set (Service Model No.: TTRA0214) separately, consult your dealer.
f Ask a qualied technician to do the installation work such as mounting the projector on the ceiling.
f Panasonic takes no responsibility for any damage to the projector resulting from use of the Ceiling Mount
Bracket not manufactured by Panasonic or the inappropriate choice of location for installing the Ceiling Mount
Bracket, even if the warranty period of the projector has not expired.
f Unused products must be removed promptly by a qualied technician.
f Use a torque screwdriver or Allen torque wrench to tighten bolts to their specied tightening torques. Do not use
electric screwdrivers or impact screwdrivers.
(Screw tightening torque: 4 ± 0.5 N·m)
f Read the Installation Instructions of the Ceiling Mount Bracket for details.
f The model numbers of accessories and optional accessories are subject to change without prior notice.
r Specication for the screw holes to x the projector (projector bottom view)
Unit: mm

M6
12 (15/32")