Panasonic PT-RZ120

Chapter 2 Getting Started — Setting up
40 - ENGLISH
Standard status
Projection
lens Model
No.
Only [KEYSTONE] used [KEYSTONE] and [CURVED CORRECTION] used together
Only [CURVED
CORRECTION] used
Vertical
keystone
correction
angle α (°)
Horizontal
keystone
correction
angle β (°)
Vertical
keystone
correction
angle α (°)
Horizontal
keystone
correction
angle β (°)
Min. value of
R2/L2
Min. value of
R3/L3
Min. value of
R2/L2
Min. value of
R3/L3
Standard
zoom lens/
ET-DLE170
±40 ±15 ±20 ±15 0.9 1.7 0.5 1
ET-DLE035
*1
+5 / - 0 0 ― ― ― ― ― ―
ET-DLE055 ±22 ±15 ±8 ±8 1.7 4.3 1 2.6
ET-DLE060 ±16 ±10 ― ― ― ― ― ―
ET-DLE085 ±22 ±15 ±8 ±8 1.7 4.3 1 2.6
ET-DLE105 ±22 ±15 ±8 ±8 1.7 4.3 1 2.6
ET-DLE150 ±40 ±15 ±20 ±15 1.1 2.6 0.6 1.5
ET-DLE250 ±40 ±15 ±20 ±15 0.7 1.3 0.4 0.7
ET-DLE350 ±40 ±15 ±20 ±15 0.4 0.8 0.3 0.5
ET-DLE450 ±40 ±15 ±20 ±15 0.3 0.6 0.2 0.3
*1 Only the vertical keystone correction angle can be corrected in the direction in which the projector body moves away from the screen.
When using the optional Upgrade Kit (Model No.: ET-UK20)
Projection
lens Model
No.
Only [KEYSTONE] used
*1
[KEYSTONE] and [CURVED CORRECTION] used together
Only [CURVED
CORRECTION] used
Vertical
keystone
correction
angle α (°)
Horizontal
keystone
correction
angle β (°)
Vertical
keystone
correction
angle α (°)
Horizontal
keystone
correction
angle β (°)
Min. value of
R2/L2
Min. value of
R3/L3
Min. value of
R2/L2
Min. value of
R3/L3
Standard
zoom lens/
ET-DLE170
±40 ±40 ±20 ±15 0.7 1.3 0.4 0.7
ET-DLE035
*2
+5 / - 0 0 ― ― ― ― ― ―
ET-DLE055 ±22 ±15 ±8 ±8 1.3 3.3 0.8 1.9
ET-DLE060 ±16 ±10 ― ― ― ― ― ―
ET-DLE085 ±22 ±15 ±8 ±8 1.3 3.3 0.8 1.9
ET-DLE105 ±22 ±15 ±8 ±8 1.3 3.3 0.8 1.9
ET-DLE150 ±40 ±40 ±20 ±15 0.9 2 0.5 1.1
ET-DLE250 ±40 ±40 ±20 ±15 0.5 1 0.3 0.6
ET-DLE350 ±45 ±40 ±20 ±15 0.3 0.6 0.2 0.4
ET-DLE450 ±45 ±40 ±20 ±15 0.2 0.4 0.2 0.3
*1 When [VERTICAL KEYSTONE] and [HORIZONTAL KEYSTONE] are used simultaneously, correction cannot be made exceeding total of 55°.
*2 Only the vertical keystone correction angle can be corrected in the direction in which the projector body moves away from the screen.
Note
f When [GEOMETRY] is used, the focus of the entire screen may be lost as correction increases.
f Make the curved screen a circular arc shape with one part of a perfect circle removed.
f Adjustment range of the [GEOMETRY] items may not match the listed projection range depending on the projection lens. Use this projector
within the projection range, otherwise the correction may not work.