Panasonic PT-RZ31K

Chapter 7 Appendix — Attaching the Long Life Filter Unit (optional)
ENGLISH - 239
Attention
f Take care not to touch the radiator n, etc., when removing dirt or dust.
f Store the removed air lter cover in a safe place.
Attaching the long life lter mount clasp
Attach the long life lter mount clasp in the area the standard air lter unit was removed.
Fig. 2 Fig. 3Fig. 1
1) Attach the hook of the drop-prevention string to the long life filter mount clasp. (Fig. 1)
f Attach the hook on the tip of the drop-prevention string attached to the projector body to the long life lter
mount clasp supplied with the Long Life Filter Unit (optional) at the position indicated in the gure.
2) Attach the long life filter mount clasp to the projector body. (Fig. 2)
f Align the two hooks of the long life lter mount clasp to the position of the holes where the air lter cover
was inserted, and slide it in the direction of the arrow.
3) Secure the long life filter mount clasp. (Fig. 3)
f Securely x with one long life lter mount clasp xing screw (M4 x 10) supplied with the Long Life Filter Unit
(optional).
f When the long life lter mount clasp is attached, proceed to “Attaching the air lter unit” (x page 239)
next.
Attaching the air lter unit
Long life filter cover
Air filter unit
Guide on the long life filter cover (e)
Grip on the air filter unit (a)
Grip on the air filter unit (b)
Guide on the long life filter cover (f)
Air filter unit
Fig. 3Fig. 2Fig. 1
Cross section
1) Attach the two air filter units to the long life filter cover. (Fig. 1)
f Attach the two air lter units supplied with the Long Life Filter Unit (optional) to the long life lter cover. The
method to attach the two air lter units is the same.
f Align the position so that the grips on the air lter unit (a) and (b) will be outside the guides on the long life
lter cover (e) and (f), and push in the direction of the arrow by holding the outer frame of the air lter unit.
(Fig. 2)
f When the two air lter units are attached (Fig. 3), proceed to “Attaching the long life lter cover”
(x page 240) next.
Note
f Make sure that the air lter unit is properly attached before using the projector. If it is not attached, the projector will suck in dirt and dust
causing a malfunction.