Panasonic PT-RZ31K

Chapter 4 Settings — [PICTURE] menu
94 - ENGLISH
3) Press qw to switch the item.
f The items will switch each time you press the button.
[NATIVE] Displays the image with a color space unique to this projector.
[ITU-709] Displays the image with a color space compliant with the ITU-R BT.709 standard.
[DCI-P3 emu.] Displays the image with a color space close to DCI-P3.
[ITU-2020 emu.] Displays the image with a color space close to the ITU-R BT.2020 standard.
Note
f DCI-P3 is the specications of the digital cinema color region dened by the Digital Cinema Initiatives (DCI).
[SYSTEM SELECTOR]
The projector will automatically detect the input signal, but you can set the system method manually when an
unstable signal is input. Set the system method matching the input signal.
1) Press as to select [SYSTEM SELECTOR].
2) Press the <ENTER> button.
3) Press as to select a system format.
f Available system formats vary depending on the input signal.
Terminal System format
<R/P
R
/VIDEO> terminal, <G/
Y>/<B/P
B
/C> terminal
Select [AUTO], [NTSC], [NTSC4.43], [PAL], [PAL-M], [PAL-N], [SECAM], or [PAL60].
Set it to [AUTO] normally. (Setting [AUTO] will automatically select [NTSC], [NTSC4.43], [PAL],
[PAL-M], [PAL-N], [SECAM], or [PAL60].)
Switch the setting to the signal method for the TV used.
<RGB 1 IN> terminal, <RGB 2
IN> terminal
480/60i, 576/50i, or 576/50p
signal
Select [RGB] or [YC
B
C
R
].
640 x 480/60 or 480/60p
signal
Select [640x480/60], [480/60p YC
B
C
R
], or [480/60p RGB].
Other movie-based signals Select [RGB] or [YP
B
P
R
].
<DVI-D IN> terminal
480/60i, 576/50i, 480/60p, or
576/50p signal
Select [RGB] or [YC
B
C
R
].
Other movie-based signals Select [RGB] or [YP
B
P
R
].
<HDMI IN> terminal, <DIGITAL
LINK/LAN> terminal
480/60i, 576/50i, 480/60p, or
576/50p signal
Select [AUTO], [RGB], or [YC
B
C
R
].
Other movie-based signals Select [AUTO], [RGB], or [YP
B
P
R
].
4) Press the <ENTER> button.
Note
f For details of the types of video signals that can be used with the projector, refer to “List of compatible signals” (x page 225).
f This may not function properly for some connected external devices.
f The system method can be set using the following menu items for the SDI input.
g The [DISPLAY OPTION] menu → [SDI IN] → [SINGLE LINK SETTING] → [SDI1]/[SDI2] → [SYSTEM SELECTOR]
g The [DISPLAY OPTION] menu → [SDI IN] → [DUAL LINK SETTING] → [SYSTEM SELECTOR]
sRGB-compliant video
sRGB is an international standard (IEC61966-2-1) for color reproduction dened by IEC (International
Electrotechnical Commission).
Set according to the following steps to reproduce more faithful, sRGB compliant colors.
1) Set [COLOR MATCHING] to [OFF].
f Refer to [COLOR MATCHING] (x page 113).
2) Display the [PICTURE] menu.
f Refer to “[PICTURE] menu” (x page 87).
3) Press as to select [PICTURE MODE].
4) Press qw to set [NATURAL].
5) Press as to select [COLOR].