Panasonic PT-RZ31K

Chapter 4 Settings — Menu navigation
84 - ENGLISH
Sub-menu item Factory default Page
[BLANKING] ― 101
[INPUT RESOLUTION] ― 102
[CLAMP POSITION] [24]
*1
102
[EDGE BLENDING] [OFF] 103
[FRAME RESPONSE] [NORMAL] 104
[FRAME CREATION] ― 105
[FRAME LOCK] ― 106
[RASTER POSITION] ― 106
*1 Depends on the signal input.
[DISPLAY LANGUAGE]
Details (x page 107)
[3D SETTINGS]
Sub-menu item Factory default Page
[3D SYSTEM SETTING] [SINGLE] 108
[3D SYNC SETTING] ― 108
[3D INPUT FORMAT] [AUTO]
*1
109
[LEFT/RIGHT SWAP] [NORMAL] 109
[3D COLOR MATCHING] [SHARED 2D/3D] 110
[3D PICTURE BALANCE] ― 110
[DARK TIME SETTING] [1.5ms] 110
[3D FRAME DELAY] [0us] 111
[3D TEST MODE] [NORMAL] 111
[3D TEST PATTERN] ― 111
[SAFETY PRECAUTIONS MESSAGE] [ON] 112
[3D SAFETY PRECAUTIONS] ― 112
*1 Varies depending on the selected input terminal.
[DISPLAY OPTION]
Sub-menu item Factory default Page
[COLOR MATCHING] [OFF] 113
[LARGE SCREEN CORRECTION] [OFF] 114
[SCREEN SETTING] ― 114
[AUTO SIGNAL] [OFF] 115
[AUTO SETUP] ― 115
[BACKUP INPUT SETTING] ― 116
[SIMUL INPUT SETTING] ― 117
[RGB IN] ― 118
[DVI-D IN] ― 119
[HDMI IN] ― 121
[DIGITAL LINK IN] ― 122
[SDI IN] ― 123
[ON-SCREEN DISPLAY] ― 126
[IMAGE ROTATION] [OFF] 128
[BACK COLOR] [BLUE] 128
[STARTUP LOGO] [DEFAULT LOGO] 128
[UNIFORMITY] ― 129
[SHUTTER SETTING] ― 129
[FREEZE] ― 132
[WAVEFORM MONITOR] [OFF] 132
[CUT OFF] ― 133