22 - ENGLISH
Control panel and Indicators
1
2
3
4
5
6
7
1 Power indicator <ON(G)/STANDBY(R)>
Displays the status of the power.
2 Power <v/b> button (v standby / b power on)
Turns the projector on/off.
3 asqw buttons
Used to select the menu items in the menu operation.
4 <MENU> / q button
Displays the menu screen.
5 Warning indicator <WARNING>
Indicates the abnormal conditions of the projector.
6 <KEYSTONE> button
Used to correct the keystone. (x page 39)
7 <INPUT/ENTER> / w button
Displays the input source menu. (x pages 37, 48)
Used to execute <ENTER> button when the menu
screen appears.
Note
f The <INPUT/ENTER> button on the control panel is functioned as the <ENTER> button when the menu screen is displayed.
The operating procedure of menu screen is described as "Press the <ENTER> button" in this manual in order to unify the
control panel operation with the remote control operation.
12 Control panel and Indicators
13 Lamp cover (x page 96)
The lamp unit is located inside.
14 Focus ring
Adjust the focus.
12
8
13
Top
Bottom
Projection direction
1
14
1
Chapter 1 - Preparation - About your projector
To Next Page
Loading...
