84 - ENGLISH
Web control function
(The wireless module (Model No.: ET-WML100) of the optional accessories is required if the wireless LAN is connected.)
Using Web control functions, you can perform the following operations from a computer.
f Setting and adjustment of the projector
f Displaying projector status
f Setting of E-mail message sending
Computer that can be used for setting
A web browser is required to use the web control function. Conrm that your web browser can be used beforehand.
OS Compatible web browser
Windows Internet Explorer 7.0/8.0/9.0/10.0/11.0
Mac OS Safari 4.0/5.0/6.0/7.0
Note
f Communication with an E-mail server is required to use the E-mail function. Conrm that the E-mail can be used
beforehand.
Accessing from the web browser
1) Activate the Web browser in the personal computer.
2) Enter the IP address set by the projector into the URL input field of the web browser.
f The [Network Display System] screen is displayed.
3) Click [Login ] and enter the password in the [Password] column.
f The factory default setting of the user name is “admin” (xed) and the password is “admin”.
4) Click [Login ].
f The [System Status] page is displayed.
Note
f You can click the upper right corner of the web browser screen to select the display language (Only for English, Japanese,
Traditional Chinese and Simplied Chinese).
f Do not perform setting or control simultaneously by starting up multiple web browsers. Do not set or control the projector
from multiple computers.
f Change the password rst. (eight characters in single byte) (x page 86)
f If the screen for the web control is not displayed, consult your network administrator.
Chapter 5 - Operation of Function - Web control function
To Next Page
Loading...
