Panasonic PT-TX320 - Specifications

106 - ENGLISH
Specications
The specications of the projector are as follows.
Power supply
100 V - 240 V (100 V - 240 V alternating current), 50 Hz/60 Hz
Power consumption
3.5 A, 300 W
In standby mode (when [Standby mode] is set to [Eco]): 0.5 W
In standby mode (when [Standby mode] is set to [Normal]): 6 W
LCD
panel
Panel size
PT-TW350
1.5 cm (0.59") (aspect ratio 16 : 10)
PT-TX410, PT-TX320
1.6 cm (0.63") (aspect ratio 4 : 3)
Display method
3 transparent LCD panels (RGB)
Drive method
Active matrix method
Pixels
PT-TW350
1 024 000 pixels (1 280 x 800 dots) x 3 panels
PT-TX410, PT-TX320
786 432 pixels (1 024 x 768 dots) x 3 panels
Lens
Zoom
Fixed-focus
Focus
F 1.8, f 6.08 mm
Luminous lamp
230 W UHM lamp
Light output *
1
PT-TW350
3 300 lm
PT-TX410
3 800 lm
PT-TX320
3 200 lm
Contrast ratio *
1
16 000 : 1 (When [Lamp control] is set to [ (Normal)], [Image mode] is set to [Dynamic]
and [Iris] is set to [On].)
Appli-
cable
scanning
frequen-
cy *
2
for Video signal
(including
S-video)
Horizontal : 15.73 kHz, Vertical : 59.94 Hz
Horizontal : 15.63 kHz, Vertical : 50.00 Hz
for RGB signal
Horizontal 15 kHz - 91 kHz, Vertical 24 Hz - 85 Hz
Dot clock frequency: 162 MHz or less
for YP
B
P
R
signal
525i(480i) Horizontal 15.73 kHz, Vertical 59.94 Hz
625i(576i) Horizontal 15.63 kHz, Vertical 50 Hz
525p(480p) Horizontal 31.47 kHz, Vertical 59.94 Hz
625p(576p) Horizontal 31.25 kHz, Vertical 50 Hz
750(720)/60p Horizontal 45.00 kHz, Vertical 60 Hz
750(720)/50p Horizontal 37.50 kHz, Vertical 50 Hz
1125(1080)/60i Horizontal 33.75 kHz, Vertical 60 Hz
1125(1080)/50i Horizontal 28.13 kHz, Vertical 50 Hz
1125(1080)/60p Horizontal 67.50 kHz, Vertical 60 Hz
1125(1080)/50p Horizontal 56.25 kHz, Vertical 50 Hz
1125(1080)/24p Horizontal 27.00 kHz, Vertical 24 Hz
1125(1080)/24sF Horizontal 27.00 kHz, Vertical 48 Hz
1125(1080)/25p Horizontal 28.13 kHz, Vertical 25 Hz
1125(1080)/30p Horizontal 33.75 kHz, Vertical 30 Hz
for HDMI signal
525i(480i)*
3
, 625i(576i)*
3
, 525p(480p), 625p(576p), 750(720)/60p, 750(720)/50p,
1125(1080)/24p, 1125(1080)/24sF, 1125(1080)/25p, 1125(1080)/30p, 1125(1080)/60p,
1125(1080)/50p, 1125(1080)/60i, 1125(1080)/50i
Displayable resolution: VGA - WUXGA (non-interlace)
Dot clock frequency: 25 MHz to 162 MHz
Color system
7 (NTSC, NTSC4.43, PAL, PAL-N, PAL-M, SECAM, PAL60)
Projection size
1.27 m -2.54 m (50"-100")
Screen aspect ratio
PT-TW350
16:10
PT-TX410, PT-TX320
4:3
Projection scheme
[Front], [Rear], [Ceiling/Front], [Ceiling/Rear] (Menu setting system)
Built-in speaker
10 W (monaural) x 1
*1 Measurement, measuring conditions and method of notation all comply with ISO/IEC 21118:2012 international standards.
*2 For details of video signals that can be projected using this projector, refer to “List of compatible signals”.
( x page 104)
*3 Pixel-Repetition signal (dot clock frequency 27.0 MHz) only
Chapter 7 - Appendix - Specications