Panasonic PT-TX320 - Using the Freeze Function; Using the AV Mute Function; Using the Presentation Timer Function; Switching the Lamp Power

40 - ENGLISH
Using the freeze function
You can freeze the projected image and stop the sound temporarily, regardless of the playing condition of the external device.
button
1) Press the <FREEZE> button on the remote control.
f The video is paused and the audio is muted. The icon is displayed on the screen during Freeze.
2) Press the <FREEZE> button again.
f The video playback resumes and the audio is unmuted.
Note
f When no signal input, the key operation is invalid and the icon will appear.
Using the AV mute function
If the projector is not used for a certain period of time during the meeting intermission, for example, it is possible to turn off the
audio and image temporarily.
button
1) Press the <AV MUTE> button on the remote control.
f The audio and image turn off.
2) Press the <AV MUTE> button again.
f The audio and image turn on.
Using the presentation timer function
You can operate the P-timer function.
Presentations, etc. can be performed while checking the elapsed time.
button
1) Press the <P-TIMER> button on the remote control.
f The count is started.
f The elapsed time is displayed at the bottom right of the projected image.
2) Press the <P-TIMER> button again.
f The count is stopped.
3) Press the <P-TIMER> button again.
f P-timer is nished.
Switching the lamp power
This function allows you to switch the lamp power.
button
1) Press the <LAMP> button on the remote control.
f It will switch each time you press the button, [ (Normal)] → [ (Eco 1)] →[ (Eco 2)].
Note
f For details, please refer to the [Setting] menu → [Lamp control] (x page 56).
Using the digital zoom function
(Only for still image-based computer (RGB) and still image-based HDMI signals input)
You can enlarge the center area. You can also change the location of the area to be enlarged.
Chapter 3 - Basic Operations - Basic operations by using the remote control