r Wireless LAN
To use the wireless LAN function with the projector, it is necessary to attach the optional Wireless Module (Model
No.: ET-WML100).
Compliance standards IEEE802.11b/g/n
Transmission method DSSS, OFDM
Frequency range
(Channel)
2 412 MHz to 2 462 MHz (1 to 11 ch)
Transmission speed
(Standard value)
IEEE802.11b Maximum 11 Mbps
IEEE802.11g Maximum 54 Mbps
IEEE802.11n Maximum 150 Mbps
Encryption method WPA2-PSK(AES)
r Compatible signals
Refer to “List of compatible signals” (x page 128) for the types of video signals that can be used with the
projector.
For video signal input
Horizontal : 15.73 kHz Vertical : 59.94 Hz
Horizontal : 15.63 kHz Vertical : 50 Hz
For Y/C signal input
Horizontal : 15.73 kHz Vertical : 59.94 Hz
Horizontal : 15.63 kHz Vertical : 50 Hz
For RGB signal input
f Displayable resolution: 640 x 400 to 1 920 x 1 200
f Dot clock frequency: 162 MHz or less
For YC
B
C
R
/YP
B
P
R
signal input
f Displayable resolution: 480i/576i to 1 920 x 1 080
f Dot clock frequency: 148.5 MHz or less
For HDMI signal input
f Displayable resolution for movie-based signals: 480i/576i
*1
to 1 920 x 1 080
Displayable resolution for still image signals: 640 x 400 to 1 920 x 1 200 (non-interlaced)
f Dot clock frequency: 25 MHz - 162 MHz
*1 Pixel-Repetition signal (dot clock frequency 27.0 MHz) only
132 - ENGLISH
Chapter 7 Appendix - Specications
To Next Page
Loading...
