Panasonic PT-VW360D

Descriptions of items
1
2
3
4
5
6
7
000000000
PT-VW360D
1 Page tab
Pages are switched by clicking this item.
2 [Status]
The status of the projector is displayed by clicking this item.
3 [Projector control]
The [Projector control] page is displayed by clicking this item.
4 [Detailed set up]
The [Detailed set up] page is displayed by clicking this item.
5 [Change password]
The [Change password] page is displayed by clicking this item.
6 [Crestron Connected(TM)]
The control page of Crestron Connected
TM
is displayed by
clicking this item.
7 [Download]
The download page of Presenter Light software is displayed by
clicking this item. (x page 94)
[Projector status] page
Click [Status] → [Projector status].
Display the status of the projector for the following items.
1
11
10
12
13
14
2
3
4
5
6
7
8
9
PT-VW360D
000000000
1 [PROJECTOR TYPE]
Displays the type of the projector.
2 [MAIN VERSION]
Displays the rmware version of the projector.
3 [POWER]
Displays the status of the power.
4 [PICTURE MODE]
Displays the setting status of [PICTURE MODE].
5 [INPUT]
Displays the status of the selected input.
6 [INTAKE AIR TEMPERATURE]
Displays the status of the air intake temperature of the projector.
7 [EXHAUST AIR TEMPERATURE]
Displays the status of the exhaust air temperature of the
projector.
8 [OPTICS MODULE TEMPERATURE]
Displays the status of the optics module temperature of the
projector.
9 [LAMP RUNTIME]
Displays the runtime of the luminous lamps (converted value).
10 [PROJECTOR RUNTIME]
Displays the runtime of the projector.
11 [SERIAL NUMBER]
Displays the serial number of the projector.
12 [AV MUTE]
Displays the status of the AV mute.
13 [VOLUME]
Displays the volume status.
14 [SELF TEST]
Displays the self-diagnosis information.
98 - ENGLISH
Chapter 5 Operation of Function - Web control function