Panasonic PT-VW360D

Error information page
When [Error (Detail)] or [Warning (Detail)] is displayed in the self-diagnosis display of the [Projector status]
screen, click it to display the error/warning details.
f The projector may go into the standby status to protect the projector depending on the contents of the error.
1
PT-VW360D
000000000
1 Self-diagnosis result display
Displays the item check results.
[OK]: Indicates that operation is normal.
[FAILED]: Indicates that there is a problem.
[WARNING]: Indicates that there is a warning.
r [FAILED] items displayed when a problem occurs
Parameter Description
[FAN] Trouble has occurred in the fan or its drive circuit. Consult your dealer.
[FAN(INTAKE)] Trouble has occurred in the intake fan.
[FAN(LAMP)] Trouble has occurred in the luminous lamp cooling fan.
[FAN(EXHAUST)] Trouble has occurred in the exhaust fan.
[INTAKE AIR TEMPERATURE]
The air intake temperature is too high. The projector may be used in an operating environ-
ment where the temperature is high, such as near a heating appliance.
[EXHAUST AIR TEMPERATURE] The exhaust air temperature is high. The air exhaust port may be blocked.
[OPTICS MODULE TEMPERATURE]
The temperature around the optics module inside the projector is high. The projector may
be used in an operating environment where the temperature is high, such as near a heating
appliance.
[LAMP REMAIN TIME]
The luminous lamp runtime has exceeded the prescribed cumulative time, and it is now time
to replace the luminous lamp.
[LAMP STATUS]
The luminous lamp has failed to light.
Wait a short while for the luminous lamp to cool off, and then turn on the power.
[APERTURE (CONTRAST-SHUTTER)] Trouble has occurred in the contrast shutter circuitry. Consult your dealer.
[INTAKE AIR TEMP.SENSOR]
Trouble has occurred in the sensor used to detect intake air temperature. Consult your
dealer.
[OPTICS MODULE SENSOR] Trouble has occurred in the optics module sensor. Consult your dealer.
[EXHAUST AIR TEMP.SENSOR]
Trouble has occurred in the sensor used to detect exhaust air temperature. Consult your
dealer.
[AIR FILTER]
There is too much dust accumulated in the air lter unit. Turn off the projector and unplug the
power plug from the wall outlet, then replace the air lter unit.
[COVER OPEN] The cover is open.
[Network status] page
Click [Status] → [Network status].
The current network setting status is displayed.
ENGLISH - 99
Chapter 5 Operation of Function - Web control function