Panasonic PT-VW435NU

Network
ENGLISH -
69
Settings
Press ▲▼ to select an item, and 2 )
change the setting according to the
instructions.
Name change
You can change the user
name.
DHCP

(DHCP client
function)
ON: If a DHCP server
exists in the
network to which
the projector is
connected, the
IP address will
automatically be
acquired.
OFF: If a DHCP server
does not exist in
the network to
which the projector
is connected,
additionally set [IP
address

], [Subnet
mask

] and
[Default gateway

].
IP address

(Display of IP
address and
setting)
Enter the IP address if
DHCP server is not used.
Subnet mask

(Displaying and
setting the subnet
mask)
If not using a DHCP
server, enter the subnet
mask.
Default gateway

(Display of
gateway address
and setting)
Enter the gateway address
if DHCP server is not
used.
DNS1
(Display of
Preferred DNS
server address and
setting)
Enter the DNS server
address if DHCP server is
not used.
DNS2
(Display of
Alternate DNS
server address and
setting)
Enter the alternate DNS
server address if DHCP
server is not used.
“Glossary” ( 
Æ
page 117 – 118)
Note
Before using the DHCP server, make sure the DHCP
z
server is already functioning.
For details of IP address, subnet mask, gateway and
z
DNS server, ask the network administrator.
A wired LAN and wireless LAN cannot be used in the
z
same segment.
Press ▲▼◄► to select [Next], and 3 )
press <ENTER> button.
[Wired detailed setup] screen (2/3) setting screen
is displayed.
Make the settings related to the wireless
connection between the projector and the
network.
Select [Cancel] instead of [Next] to cancel the
conguration change.
SSID z

If the mode is [AD HOC],
enter the same character
string as that of SSID set
on the computer to be
connected. If the mode is
[Infrastructure

], enter
the SSID registered at the
access point

.
“Glossary” ( 
Æ
page 117 – 118)
Note
SSID has to be entered in alphanumeric letters.
z
You cannot set “any” or “ANY” for SSID.
z
Mode z
Select [AD HOC] or
[Infrastructure].
AD HOC

Connect projector and
computer directly without
access point.
Infrastructure

Connect through access
point.
“Glossary” ( 
Æ
page 117 – 118)
Authentication z
Set the user
authentication method
used by the network to
be connected.
OPEN
Select when making
a connection using
[AD HOC], or when
the access point
authentication method
is OpenSystem
1
.
SHARED
Select when making
a connection using
[AD HOC], or when
the access point
authentication method
is Shared Key
1
.
WPA-PSK
2
Select when the
access point
authentication method
is WPA-PSK
1
.
WPA2-PSK
2
Select when the
access point
authentication method
is WPA2-PSK
1
.
WPA-EAP/
WPA2-EAP
2
Select when the
access point
authentication method
is WPA-EAP
1
/
WPA2-EAP
1
.
WPA-EAP
2
Select when the
access point
authentication method
is WPA-EAP
1
.